OPTIONAL FEEDING MODE:

PRODUCT SCOPE OF APPLICATION:

Appllcable scope of equlipment: suitable for precision stampingparts, gear partauto parts, powder metallurgy parts,machine-add-ed workplece products, etc.

Equipment furction: the workpiece edge, hole deburring treatment.Kplece surface consistent, all edge holes to achieve aso that the wo]uniform R arc. 

Equipment conbination: single or multiple combination structures of abrasive belt grinding station + disk brush grinding station

EQUIPMENT  CONFIGURATION:

1.Conveyor belt +rubber roller clip feeding (tor ordinary workpieces.Workpiece length ≥300 mm) 

2.Strong permenent megnet adsorpion conveying maferal for carbon steel wortpleces.Workpilece size ≥30mm×30mm) 

3.Vacuum negative pressure adsorption conveying feeding (for stainless steel plate,copper plate,aluminum plate,etc.)is not magnetically  adsotbed.

   Work-piece size ≥50mm×50mm)

4..Processing width of equipment: 300mm、400mm、650mm、1050mm、1350mm

       1. 300mm width machine consists of three plantary arrangement brushes, single brush autorotates and the whole brush combination revolves 

      2. 400mm width machine consists of four plantary arrangement brushes, single brush autorotates and the whole brush combination revolves

      3. 650mm width machine consists of five interlaced disk brushes, two adjacent disk brushes are rotated forward and backward, and the whole 

         disk brush combination swings horizontally in the verical direction of the feed

      4.1050mm width machine i consists seven interlaced disk brushes, two adiacent disk brushes are rotated forward and backward, and the whole 

          disk brush combination swings horizontally in the verical direction of the feed

      5. 1350mm width machine is composed of ninere rotated forward and backward, and the wholenterlaced disk brushes,two adiacent disk brushesdisk

           brush combination swings horizontally in thevertical direction of the feed

6  .Four-column synchronous lifting, lifting height digtal setting and reading, Display accuracy of 0.01mm 

7. The equipment is supplied with grinding ftuid by sprinkler pipes at each station.The magneic adsorption outlet is equipped with  demagneitizing device 

     to demagnetize the workpiece. 

8 .Automatic paper tape iter is used to ilter  grinding dust to provide ginding  cycle  grinding fluid to achieve environmental  potection producticn.

9. .Equipped with wet vacuum cleaners or industrial pulse vacuum cleaners to treat grinding dust, achieving environmentally friendly production.

TECHNICAL PARAMETER:

PROCESSING EFFECT DRAWING: